I read sometime ago how to join two dildoes together.  I searched the How to & FAQ topic pages, but, alas, I didn't find the answer.  Help, can someone give me the directions on how to permanately join my dildoes to make a "super long" colon clogging dildoe?  Thanks Dickie.

some thermo plastics and vynil types can be melted together with the right temp with out burning them but the down side is tha they tend to be the ones on the firmer side which usually is problematic for such deep use and are also the more porus types so hygenicly are some of the worst around as well and are generally slowly disappearing from the toy market due to this

mr wolfy

Sounds like what you want is a "colon snake"  come in  couple of lengths/widths.  I have a 30"x1" silicon one that I use once in a great while.

Like these.... http://www.mr-s-leather.com/D564/the-original-colon-snake.html

Much safer(one piece,silicone) than what your proposing

I have a few doubles bonded together. I used the ends I cut off and an electric type fryer. polymelt and jellies both melt at around 350f, use plenty of ventilation, some i have are a couple of years old now, but i always check the bonded areas for cracks or separation before use, but so far so good. the fryers are limited to about 375-400f, BE CAREFUL if you try this and wear proper clothing and gloves and eye protection, 350f polymelt is like hot oil but it sticks to anything it touches, and keep it away from water, same reaction as water hitting hot oil, once they are bonded i used a clothes iron and smoothed the connection joint. I've never had a problem yet, like i said i always bend them at the joint before use to check for an signs of joint separation. If you want I can post a pic of a joined toy, i've even combined polymelt and jelly toys together with no problems. WWhen melted it acts like a thick syrup, almost the same texture as caulk or tube silicone, not really pourable, but great for bonding the 2 ends together